Preface
Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS DX500 S3/DX600 S3 (hereinafter
referred to as ETERNUS DX).
The ETERNUS DX is designed to be connected to Fujitsu servers (
Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY,
and other servers) or non-Fujitsu servers.
This manual provides the basic information that is required to use the ETERNUS DX.
This manual is intended for use of the ETERNUS DX in regions other than Japan.
Please carefully review the information outlined in this manual.
Twenty-Ninth Edition
May 2019
8
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Overview
Copyright 2019 FUJITSU LIMITED
P3AM-7702-29ENZ0
To Next Page
Loading...
