14
1.3 Operator panel
The following table shows the details of alarms.
Indication Meaning
E2 An trouble occurred on the optical system
(front).
E3 An trouble occurred on the optical system
(back).
E4 The motor fuse has blown.
E6 An trouble occurred on the operator panel.
E7 An trouble occurred in the EEPROM.
E8 The SCSI interface fuse has blown.
E9 An trouble occurred in image memory.
Ec An trouble occurred in memory.
Ed An trouble occurred in the SCSI interface
controller.
To Next Page
Loading...
Need help?
General
