Fujitsu FI-4120C User Manual

2.2 Connecting the Scanner to a PC
23
2
INSTALLATION OF A SCANNER
The following shows the procedure for connecting the SCSI
interface cable.
1.
Insert the SCSI interface cable into the interface
connector until both sides click.
2.
Connect the connector on the other end of the
cable to the personal computer.
ATTENTION
When using the scanner on the SCSI
interface, connect the scanner so that it is
the terminal device on the SCSI daisy
chain.

Fujitsu FI-4120C Specifications

General

Brand	Fujitsu
Model	FI-4120C
Category	Scanner
Language	English