Why Fujitsu Scanner does not turn on?
If your Fujitsu Scanner isn't powering on, ensure the AC and USB cables, along with the AC adapter, are correctly connected. Try disconnecting and reconnecting these components. Verify you are using the AC adapter and cables supplied with the scanner. Also, ensure the scanner driver is correctly installed.
What to do if Fujitsu Scanner scanning does not start?
If your Fujitsu Scanner isn't starting the scanning process, first unlock the shipping lock. Check that the USB cable is correctly connected. Try using a new USB cable and connecting it directly into PC USB Port. If none of these work, the scanner operation might actually be normal.
What to do if my Fujitsu Scanner scanning does not start?
First, unlock the shipping lock. Next, ensure the USB cable is correctly connected, and if the issue persists, try using a new USB cable. Also, connect directly into PC USB Port. If the problem continues, the scanner operation is normal.
Why are images distorted or blurred with Fujitsu fi-60F?
If your Fujitsu Scanner is producing distorted or blurred images, start by cleaning any dirty areas as described in the Operator's Guide, section "2. Daily Care". Ensure the scanner remains still during operation, free from any vibrations. Place the scanner on a flat, level surface. Also, make sure the document is flat and held down slightly with the document cover.
What to do if Fujitsu fi-60F automatic paper size detection is failed?
If your Fujitsu Scanner fails to automatically detect paper size, start by cleaning any dirty areas as instructed in the Operator's Guide, section "2. Daily Care". Ensure the document cover is closed properly and scan again. If the document has a non-rectangular shape or folded corners, specify the scan area manually in the driver settings. Also, if the document has dark-colored edges, manually specify the scan area in the driver setting window.
Why does Fujitsu fi-60F Scanner image become black in Black & White mode?
If your Fujitsu Scanner produces a completely black image when scanning in Black & White mode, begin by cleaning any dirty areas, referring to the Operator's Guide, section "2. Daily Care". Then, try adjusting the Threshold and/or Brightness settings. As an alternative, place a piece of white paper behind the document and attempt the scan again.
How to adjust shadow on leading edge of Fujitsu Scanner image?
To adjust the shadow on the leading edge of a scanned image with your Fujitsu Scanner, adjust the [Sub-scan Setting] on [Scanners and Cameras] in the control panel.
How to fix Fujitsu fi-60F when it does not turn on?
First, ensure the AC and USB cables, including the AC adapter, are correctly connected. If the scanner still doesn't power on, disconnect and reconnect the AC cable, AC adapter, and USB cable. Make sure you are using the AC adapter and cables supplied with your Fujitsu scanner. Also, verify that the scanner driver is correctly installed.
Why are the images from my Fujitsu fi-60F distorted or blurred?
Distorted or blurred images may occur if the scanner is vibrating during scanning, or if it is not placed on a flat, level surface. Also, the document may not be placed flat. Clean the dirty locations as instructed in the Operator's Guide "2. Daily Care". To resolve this, ensure the scanner is stable, the document is flat and held down slightly with the document cover, and the scanner's glass is clean.
Why is the image black when scanning in Black & White mode with my Fujitsu fi-60F?
If your scanned image appears black when scanning in Black & White mode, it may be due to dirty components. Clean the dirty locations as instructed in the Operator's Guide "2. Daily Care". Also, adjust the Threshold and/or Brightness. If there are any contents such as characters on the backside of the document, they may be seen through. Place a piece of white paper behind the document and scan again. When using "Automatic Size and Skew detection", place a piece of white paper of the same size as the document behind the document.
General| Optical Resolution | 600 dpi |
|---|---|
| Connectivity | USB 2.0 |
| Color Depth | 24-bit color |
| Scanning Method | Contact Image Sensor (CIS) |
| Maximum Document Size | A4 |
| Scanning Area | 216 x 297 mm |
| Power Consumption | 1.5 W (standby) |
To Next Page
