4
5. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
■
Preparation
Confirm the following items before installing the driver
application.
• Remove the Setup DVD-ROM from its package,
but do not insert the Setup DVD-ROM into the
DVD driver yet.
■
Installing the ISIS Scanner Driver
1. Turn your PC on and log on to Windows.
2. Insert the "Setup DVD-ROM" into the DVD
drive.
⇒ <SETUP DISK START UP SCREEN> appears.
3. Click [INSTALL], and then click [ISIS Driver].
4. Select a language used for installation on
[Choose Setup Language] window and click
[Next].
5. Follow the instructions on the window to install
the application.
6. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
Your computer will be restarted. Do not remove the
Setup DVD-ROM from the DVD drive until your PC
has completely restarted
Now the installation of the scanner driver is completed.
■
Installing QuickScan Pro™
"QuickScan Pro™" is an image capturing software that
complies with the ISIS standard. The ISIS scanner driver
To finish the installation, it may be
necessary to restart your computer.
Follow the instructions on the window.
Windows XP screenshots are used in
this section as examples. The windows
and operations may vary slightly
depending on your OS.
Log on as a user with "Administrator"
privileges (privileges of the administra-
tor of your PC).
This screen may not appear when the
"Autoplay" setting of your PC is OFF.
In this case, run "AutoPlayer.exe" in
this DVD-ROM directly from the
"Explorer" or "My Computer".
To Next Page
Loading...
Need help?
General