Fujitsu fi-60F Getting Started

3
4. Select a language used for installation on
[Choose Setup Language] window and click
[Next].
5. Follow the instructions on the window to install
the application.
6. When the [InstallShield Wiizard Complete] win-
dow appears, click [Finish].
Installation of the scanner driver is completed.
■ Installing ScandAll PRO Lite
"Scandall PRO Lite" is an image capturing software that
complies with the TWAIN standard. The TWAIN scan-
ner driver enables you to capture images with a
FUJITSU image scanner fi-series product.
1. Insert the Setup DVD-ROM into the DVD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
2. Click [INSTALL], and then click [ScandAll PRO
Lite].
3. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
4. Install the application following the instructions
on the window.
ATTENTION
Depending on the state of the operat-
ing system, the computer may shut
down and restart. In this case, the
computer detects the scanner when it
starts up. Do not remove the Setup
DVD-ROM from the DVD drive until
the computer completely starts up
again.
ATTENTION
To confirm whether the installation
was successful, perform a scanning
operation with an application that
complies with the TWAIN regulations
such as ScandAll PRO Lite.
ATTENTION
Log on as a user with "Administrator"
privileges (privileges of the adminis-
trator of your PC).

Fujitsu fi-60F Specifications

General

Brand	Fujitsu
Model	fi-60F
Category	Scanner
Language	English