Fujitsu fi-60F Getting Started

5
enables you to capture images with a FUJITSU image
scanner fi-series product.
1. Insert the Setup DVD-ROM into a DVD drive.
⇒ <SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL], and then click [QuickScan Pro
(Trial)].
3. In the [Welcome to the InstallShield Wizard for
QuickScan 4.7] dialog box, click the [Next].
4. Enter the required information, then click
[Next].
5. Install the application following the instructions
on the window.
2.2 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to "fi60F Opera-
tor’s Guide" "4.2 Installation Specifications" in
the Setup DVD-ROM.
2. Unlock the Shipping lock.
The carrier unit inside the scanner is secured by
the shipping lock to prevent the scanner from
becoming damaged during transportation from the
factory.
To unlock the shipping lock and use the scanner,
slide the switch on the rear of the scanner to the
right.
ATTENTION
Log on as a user with "Administrator"
privileges (privileges of the administra-
tor of your PC).
ATTENTION
"QuickScan Pro™" included in the
Setup DVD-ROM is an evaluation ver-
sion. For further use after the expira-
tion of its evaluation period of up to 30
launches, it is necessary to purchase
a fully functional version of QuickScan
Pro™. (When you install the evalua-
tion version, do not change the Serial
Number already displayed.)
HINT
For information about the features and
operations of QuickScan Pro™, refer
to "QuickScan Overview" or "Quick-
Scan Help."
Form the [start] menu, select [All Pro-
grams] -> [EMC Captiva] -> [Quick-
Scan], and then select a desired file.

Fujitsu fi-60F Specifications

General

Brand	Fujitsu
Model	fi-60F
Category	Scanner
Language	English