2
1.1 Turning the Scanner ON
Because the power supply of this scanner is linked to the power supply of your PC, fi-60F is not
equipped with a separate power button or switch.
If you keep connecting the AC adapter to the the scanner, plugging the AC cable into a power out-
let, and connecting the scanner to your PC, you can use the scanner without reminding of the
switching.
If you turn on your PC...
The Scanner LED lights when starting up Windows (Scanner turned on)
If you turn off your PC...
The Scanner LED goes out when shutting down Windows (Scanner turned off)
You can also turn off the scanner by doing the following:
• Disconnect the USB cable from the scanner or PC.
• Disconnect the AC adapter from the scanner.
• Unplug the AC cable from the power outlet or the AC adapter.
■ Power Save Mode
The Power Save mode keeps the scanner in a low-powered state after it has been turned ON.
If no operation is performed on the scanner for 15 minutes, the scanner automatically switches to
the Power Save mode.
To return from the Power Save mode, perform a scan using the scanner driver.
To Next Page
Loading...
Need help?
General