viii
■Safety Precautions
In the following warnings, "power cable" may refer to the AC cable connected to the AC adapter
collectively.
Do not damage the AC cable.
A damaged AC cable may cause fire or electric shock.
Be careful of the following when handling the power cable:
• Do not moisten, modify, tie, bundle, or wind the cable.
• Do not place heavy objects on the cable, trap the cable in a doorway, drop or dam-
age the cable in any other way.
• Do not pull or forcibly bend or twist the cable.
• Do not place any metal near to the plug of the power cable.
Do not use damaged AC cables or power plugs, or install any cables or power plugs
to loose wall sockets.
Use only specified AC cables and connector cables.
Use only specified AC cables and connector cables. Failure to use the correct cables
might cause electric shock and/or equipment failure.
Do not use the AC cable provided with this scanner with other devices, since this may
cause equipment failure or electric shock.
Use this scanner only at the indicated power voltage. Do not
connect to multiple-power strips.
Use this scanner only at the indicated power voltage and current. Improper power
voltage and current might cause fire or electric shock. Do not connect to multiple-power
strips.
Do not touch the AC cable with wet hands.
Do not touch the power plug with wet hands. Doing so can cause electric shock.
Wipe any dust from the power plug.
Wipe off any dust from the power cable, metal parts on the power plug or metal fittings
with a soft, dry cloth. Accumulated dust can cause fire or electric shock.
To Next Page
Loading...
Need help?
General