4
2. Load the document on the document bed with the scanning face down and the top left
corner aligned to the reference point.
3. Gently close the document cover.
4. Start up the scanner application, and scan the document.
For details on how to scan documents see "1.3 How to Use the Scanner Driver" (page 5).
• You can pull out the document cover from the scanner when you scan
the thick document like a book.
In such a case, press down the document from the top, let it stick to the
document bed firmly.
<Attention>
Be careful of the following points:
The scanned image will become blurred if the document loses touch
with the document bed by curl, crease, etc. .
Because of opening the document cover, the light from an indoor flu-
orescent light may penetrate the document, and may affect the
brightness of image data. (The thinner document is, the more it is
influenced.)
In such a case, scan the document with closing the document cover.
• Do not disconnect the USB cable or AC adapter from the scanner
when the scanning operation is ongoing.
To Next Page
Loading...
Need help?
General