1.3 How to Use the Scanner Driver
fi-60F Image Scanner Operator’s Guide 9
BASIC SCANNER OPERATIONS
1
Image Mode
Specifies the image type for the scanned documents.
[Scan] button
Starts scanning documents with the current settings.
[Preview] button
Documents are scanned preliminarily before the actual scanning.
You can confirm the image of the documents in the preview window.
[Close] button
Saves the current settings and closes this window.
[Reset] button
Used to undo changes of settings.
[Help] button
Opens the "TWAIN Scanner Driver Help" window. The window also opens by pushing
the [F1] key.
[About...] button
Opens an information window about the TWAIN Scanner Driver's version.
Black & White Documents are scanned in binary (black and white).
Halftone Documents are scanned through halftone processing
in black and white.
Grayscale Documents are scanned in gradations from black to
white. For this mode you can select 256 gradations or
4 bit (16 gradations).
Color Documents are scanned in color. For this mode, you
can select 24 bit Color, 256 Color or 8 Color.
To Next Page
Loading...
