26
2. Clean the following locations using a soft, dry cloth moistened with cleaning fluid.
• Document holding pad
Wipe gently.
• Document bed
Wipe lightly.
3. Wait for cleaned parts to dry.
4. Gently close the document cover.
• Do not allow moisture to get inside the device during cleaning.
• It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quanti-
ties of the cleaner. In addition, wipe off the cleaner completely with a
soft lint-free cloth to leave no residue on the surface of the cleaned
parts.
Document bed
Document holding pad
To Next Page
Loading...
