Fujitsu FI-7700 - Cleaning Materials and Locations that Require Cleaning

How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Daily Care
Operational
Settings
Chapter 5 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
103
How to Load
Documents
Scanner
Overview
Cleaning Materials
For more information about the cleaning materials, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
5.1 Cleaning Materials and Locations that Require Cleaning
Name Part No. Notes
Cleaner F1 PA03950-0352 100 ml
Liquid cleaner to use for
removing dirt and stains
Cleaning Paper CA99501-0012 10 sheets
Used to clean the inside of
the scanner with ease.
Spray it with Cleaner F1
and scan it with the
scanner in the same way
as a document.
Cleaning Wipe PA03950-0419 24 packets
Pre-moistened with Cleaner
F1. It can be used instead of
moistening a cloth with
Cleaner F1.
Cotton swab Commercially
available
Used to clean a tiny part
such as the ultrasonic
sensor.
Dry cloth Used to wipe off dirt and
stains. Moisten it with
Cleaner F1 for cleaning.
ATTENTION
In order to use the cleaning materials safely and correctly, read the
precautions on each product thoroughly.