Fujitsu FI-7700 - Turning the Power ON;OFF; Daily Care; How to Turn the Power off; How to Turn the Power on

Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
23
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains how to power on/off the scanner.
How to Turn the Power ON
1 Press the [Power] button on the operator panel.
 The scanner is turned on, and the [Power] button lights in green.
During initialization, the following image is displayed on the LCD of
the operator panel.
The scanner is ready to scan when [Ready] is displayed.
How to Turn the Power OFF
1 Press the [Power] button on the operator panel for more
than 2 seconds.
 The scanner is turned off, and the [Power] button switches off.
1.3 Turning the Power ON/OFF
HINT
The method by which the scanner is powered on/off can be specified
from one of the following:
 Press the [Power] button on the operator panel.
 Use an AC power strip to control power supply for peripherals such
as a scanner in accordance with the computer's power.
 Turn on/off the scanner in accordance with the computer's power.
For details, refer to "Method of Turning the Scanner ON/OFF [Power
SW Control]" (page 204).
Me
n
u
Scan/Enter
Che
ck
Power
Stop/Clear
Me
n
u
Scan/Enter
C
h
e
ck
PowePowe
r
r
Stop/Clear
[Power] Button
[fi-7600]
[fi-7700/fi-7700S]