Fujitsu FI-7700 - How to Use the Operator Panel; Various Ways to

Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
18
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
■Back
USB Connector
Used to connect a USB cable.
Power Connector
Used to connect the power cable.
"Power cable" refers to the AC cable and AC adapter connected together.
ADF Release Tabs
Lift up these tabs to unlock and open the ADF.
Feed Mode Switch
Slide the feed mode switch to the left to switch the feed mode to Manual/Single mode.
Side Guide Locks
Lock the side guides.
EXT Connector
Used to connect the imprinter.
The imprinter is used to print text (such as letters or numbers) after a document is
scanned, and is available as an option. It can be useful for managing documents when
you add a name, date or serial number on scanned documents. For details, refer to
"A.4 Scanner Options" (page 215).