First-time setup of you r device
Switching on the device for the first time
Switchingonforthefirst time
When you switch on th e device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you shou ld set aside eno ugh time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NO T restart the device unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system
is p re-installed on the
hard disk.
► Switch on your device.
► During installation, follow th e instructions on screen.
If a W indows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, upd ates, manuals et c.
on the device or on the Internet at "
http://www.fujitsu.com/fts/support /".
You can find information and help on the W indows operating s ystem functions
on the Internet at "
http://windows.microsoft.com".
18 Fujitsu
To Next Page
Loading...
