Connecting external devices
USB port with charging function (Anytime USB charge)
USBchargingfunction
It is recommended that the notebook be operated with the power supply conn ected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB de vice is being charged.
The power supply unit must already be connected when the notebook is
switched off, as otherwise the USB charg ing function will be disabled and
the connecte d U SB devices will not be charged.
Some USB devices (e.g. m obile telephones) require a d river in ord er to utilise the
USB cha rging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the no tebook is switched off.
You can use this
USB port to charge or supply po wer to a USB device (e.g. to charge a PDA
or a mobile phon
e or to connect a USB lamp), even if the notebook is switched off.
How t o remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Left click on the icon to safely remove hardware, located in the taskbar.
► Select the device which you want to shut down and remove.
► Press th e Enter key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
Fujitsu 47
To Next Page
Loading...
