Working with the no tebook
Loudspeakers and microphones
MicrophoneLoudspeakersBassloudspeak er(subwoo fer)Volum ec ont rol
Information on the exact position of the speakers and microphone can be
found in "
Ports and controls", P age 9.
Please r efer to chapter "
Key c ombin ations", Pag e 24 for information on setting the volume
and also enabling/disabling the loudspeakers using key combinations.
If you attach an external microph one, the built-in microphone is disabled.
When you connect headpho nes or external speakers, the built-in speakers are disabled.
Information on connecting headphones and a microphone can be found
in "
Connecting exter nal devices", Page 44.
Wireless LAN / Bluetooth
The installation of radio com ponents not approved by F ujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless components on and off
► Press the key combination
Fn
+
F5
to start the WirelessSelector.
WirelessLANWirelessLANBluetoo thBluetooth
The w ireless component indicator will illuminate when one or more wireless
components are switched on.
The Bluetooth module and the w ireless LAN transmission unit (antenna) will
be switched off when you switch off the radio components.
Pay attention to the additional safety notes for devices with wire less
components provided in the "Safety" manual.
Details on using a Wireless LAN can be found in the online help system
included in the Wireless LAN software.
Setting up WLAN access
• Requirement: A W LAN must be available a nd you m u st have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
38 Fujitsu
To Next Page
Loading...
