Fujitsu LIFEBOOK A544 - Inserting or Removing a Data Carrier; Manual Removal (Emergency Removal)

Working with the notebook
Inserting or r emoving a data carrier
InsertingRemoving
The notebook must be switched on.
2
1
► Push the insert/eject button (1).

The drive tray will open.
► Gently pull the drive tra y (2) com pletely out.
► Place the data carrier in the drive tray with
the printed side facing upwards.
or
► Remove a data c arrier that has
been inserted.
► Push in the drive t ray until you
feel it lock into place.
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalof datacarrier
In the event o
f a power failure or damage to the drive, you can remove the data carrier manually.
1
2
► Switch your
notebook off.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).

The drive t
ray is ejected. Yo u can now pull
the drive t
ray (2) ou t of the drive.
Fujitsu 35