Settings in BIOS Setup Utilit y
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setu p Utility, select Exit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setu p Ut ilit y
► To discard the changes, select Exit Discarding Changes and Yes.
The settings i n place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaul
ts – C opy Standard Entries
► To copy the standard entries for all menus of the BIOS Setup U tility,
choose Load Setup Defaults and Yes.
Discard C hang es – Discard changes without exiting
the B IOS Setup Utility
► To discard the changes you have mad e, select Discard Changes and Yes.
The settings in place when BIOS Setu p Utility w as called remain effective.
You can now make additional settings in the BIOS Setup Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the B IOS Setup Utility
► To save th e changes, select Save Changes and Yes.
The changes are saved. You can now make additional se ttings in the BIOS Setup Utility.
► If you want to exit BIOS S et up Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the changes and switch off your d evice, select Save Changes a nd Power Off and Yes.
The changes are s aved. Your device is shut down.
58 Fujitsu
To Next Page
Loading...
