First-time setup of you r device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device f or the first time, connect it to the mains v oltage
using the mains adapter, see "
Mains adapter connecting", Page 17 .Themains
adapter must be connected during the entire installation process.
A system test is performed w hen your device is first switched on. Various messages
can a ppear. The display may remain dark for a short time or m ay flicker.
Please fo llow the instructions on the scree n.
NEVER switch off your de vice during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device usin g the b attery.
When used on the move, the bu ilt-in battery provides the device with the necessary powe r. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, p lease refer to the operating manual for your device.
Unpacking and
checking the d evice
Should y ou discover a ny damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual p arts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You may ne
ed the packaging in the future, if you need to transport your device.
16 Fujitsu
To Next Page
Loading...
