Fujitsu LIFEBOOK AH532 - Restoring the Hard Disk Contents under Windows; The Notebooks Date or Time Is Incorrect; The Notebooks LCD Screen Remains Blank

Troubleshooting and tips
Restoring the hard disk content
s under Windows
Harddisk:Operatingsystem,restoring
You can use the "Windows Recovery CD" (optionally available) and the "D rivers & Utilities
CD/DVD" to reinstall the operating system.
The instructions are provided on the case of the Recovery CD.
During the reinstall process your personal files and any installed programs
will be de leted. We advise you to ba ckup your files to an external hard
drive, o r CD / DVD disk before you start.
► Switch the notebook on.

The following display br
iefly appears on the screen during start-up:
<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup
► When this message appears, press the function key
F12
.
► Inser t the "Windows R
ecovery CD" into the optical drive.
► Select CD -ROM and press the Enter key.
► Follow the inst ruct
ions on the screen.
After the installation you must install all the drivers aga in. Some installed hardware
components will not be correctly supported until this has been done.
► Insert the "Drivers & Utilities" CD/DVD into th e optical drive. The CD starts automatically.
► Click on the Desk U
pdate button.
► Select Automatic driver installation (Express) and click on Start installation.
► Follow the inst
ructions on the screen.
► Resta rt your notebook when the driver installation is completed.
The notebook’s date or time is incorrect
SummertimeTime,day lightsaving sTimeno tcorrectTime notcorrec tInco rrec tdat e/tim eDateisincorrectBufferbattery,load
Cause Troublesho oting
Time and date are incorrect. ► With the BIOS-Setu p- Utility, y ou can set the
date and time in the main menu.
If the time
and date are still set incorrectly a ft er
switching
on the notebook.
► Please c ontact your sales outlet or our
Hotline/Service Desk.
The notebook’s LCD screen remains blank
LCDscr
een
LCDscr
eenistoodark
Cause Troublesho oting
Monitor is switched off.
► Press a key or touch the touchpad .
External monitor or television set connected. ► Press the key combination to switch the
screen output, see "
Key combin ations",
Page 24.
62 Fujitsu