Working with the notebook
Using the power-management features
PowerPowerBattery
The notebook uses less power when the available power-managemen t features a re used. You
will then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmental pollution reduced. By
choosing the best power options, you can make significant savings and
at the s ame time help protect the environment.
When you close the LCD screen, depen ding on the setting in Windows, the
notebook au tomatically enters a power saving mode.
We recommend the following settings:
Function On external power On battery power
Turn off monitor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 m inute s After 10 m inutes
Energy saving (S3) After 20 m inute s After 15 minutes
Hibernate m ode (S
4)
After 1 hour After 30 m inutes
► Select the power ma
nagement functions in your Control Panel.
► Select the Screen Saver in your Control Panel.
If you ne ed furthe r information about an option, you can get help with m ost
settings by pre ssing
F1
to open the Microsoft Help.
When the notebook is in power-saving mode, the following m ust be remembered:
During powe r saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never turn off your note book while it is in a power saving mode. If the built-in ba ttery is
nearly empty, close the open files and do not go into power saving mode.
If you do not intend to use your n otebook for a lo ng period of time:
► Exit power saving mode if necessary via the mouse or k eyb oard or by switching on the
notebook.
► Close all
opened programs and completely shut down the notebook.
Fujitsu 35
To Next Page
Loading...
