Working with t he noteboo k
Hot Key Description
Decrease the brightn ess of the s c re en
This Ho t Key reduces screen brightness.
DecreasebrightnessDecreas e
Increase screen brightness
This Hot Key increases screen brightness.
Increase
Energy saving functions
UsethisHotKeytoactivat
e the energy saving functions (see chapter "
Using
the energy saving functi
ons", Page 43).
Energysavingf unctions
Switch between display outputs
Use this Hot Key to select which screen(s) is/are used for display if an
external monitor is connected.
Screen output is possible:
• only on the LCD screen of the notebook
• on the LCD screen of the notebook and the external mo nitor at the
same time
• only on the external mon itor
This setting is useful if you would like a high resolution and a high
refresh rate on an external monitor.
Fn+F10Switchbetweendi splayoutputs
Bilingual keyboard:
Create screenshot
With this Hot Key, a screenshot of the c urrent screen image is crea ted and
stored in the clipboa rd.
Bilingual keyboard:
Switch virtual number keys on/off
This Hot Key switches the virtual number pad off or on. The characters
marked at the top right of the keys are displayed.
Function keys
The symbols below the keys represent function keys.
They are numbered from
F1
to
F12
.
The function keys are used to activate functions of the operating system or applications directly.
Regardless of the F-Lock setting, the function keys are the primary key function:
• until Windows is loaded (after a system reboot).
The F -Lock setting, which was last active before the system reboots, then
reappears (see chapter "
F-Lock settin g", Page 3 3).
• with BIO S acce ss during the POST phase: W hen during boot-up
Fn
+
F2
or
Fn
+
F12
are pressed, the BIOS menu is not called up . Here th e
F2
or
F12
key must be presse d without an additional key.
32 Fujitsu
To Next Page
Loading...
