Troubleshooting and tips
The notebook does not start after switching it on
Notebook
Cause Tro ub lesho ot ing
The battery is not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
The AC adapter is not connected properly. ► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
The notebook stops working
NotebookEnding
Cause Tro ub lesho ot ing
The notebook is in energy saving mode . ► End energy saving mode.
An applicat ion program has caused the
malfunction.
► Close the application program or resta rt
the notebook (by restarting th e operating
system or switching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
The printer does not print
Printerdoesnot print
Cause Tro ub lesho ot ing
The printer is not sw itched on. ► Make sure that the printer is switched
on and ready for operation (refer to th e
documentation supplied with the p rinter).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The p
rinter driver is faulty or not co rrectly
inst
alled, or it is the wrong printer driver.
► Chec
k whether the correct printer driver is
load
ed (refer to the printer documentation).
80 Fujitsu
To Next Page
Loading...
