Removing and in stalling components
during servicing
Preparing to remove components
If you are going t o remove or change system components, prepare for the removal as fo llows:
Please observe the safety information in chapter "Important notes", Page 16.
Remove th e AC plug from the power outlet!
► Switch the device off.
The device must not be in energy saving mode.
► Close the LCD screen.
► Remove all the cables
from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
► Remov e th e battery
,see"
Removing a b attery", Page 41.
66 Fujitsu
To Next Page
Loading...
