Security functions
Assigning the supervisor and user passwords
► Start the BIOS Setu p Utility and go to the Security menu.
► Select the Set Sup erviso r Password fi eld and press the Enter key.
With Enter new Password: you are asked to enter a password.
► Enter the password and p ress the Ente r key.
Confirm new P assword requires you to confirm the password.
► Enter th e password aga in and press the Enter key.
Changes have been saved is displayed as a confirmation that the ne w password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
If you d o not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisor passwor
d
Userpassword
The notebook is then rebooted and the new password comes into effect. It will now be necessary
to first enter your supervisor or user password in order to open the BIOS Setup Utility. P lease
note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor password or user password
You can only change the supervisor passw ord when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
► Start the BIOS Setu p Utility and go to the Security menu.
► When changing the password, proceed exactly as when assigning a password.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setu p Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password fi eld and press the Enter key.
You will be requested to ente r the c urrent password by the Enter Current Password prompt.
Enter New Password will appear and you will be requested to enter a new passw ord.
► Press the Enter key twice at this request.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
With the supervisor password, you simultaneously deactivate the user password.
Fujitsu 55
To Next Page
Loading...
