TV Tuner User’s Guide
39
Adjusting the Volume
1. Use the [Vol +] and [Vol -] buttons on the
remote control to increase and decrease the
volume. Note that when changing the volume,
the screen display may temporarily stop.
2. Adjust the volume to a comfortable level. Do
not raise the volume to the point that the sound
is distorted. Doing so could damage the
speakers.
Muting the Volume
1. To mute the sound completely, press the
[Mute] button on the remote control.
2. To un-mute the volume, press the [Mute]
button again.
Changing Audio Mode
Audio mode is selected when sound multiplex
broadcasting (such as bilingual broadcasts) is
received through the TV input.
Press the [Audio] button on the remote control to
select the audio mode you want. Each time the
button is pressed, the audio will toggle between
Mono-SAP, Mono-Main, and Stereo.
Watching Video from External
Devices
1. Press the [TV/Video] button on the remote
control. Each time the button is pressed, the
input signals will cycle from TV -> S-Video ->
Composite Video. Select the input type
corresponding to the input port that is
connected to the external device.
2. For instructions on operating the external
device, refer to the manufacturer’s user guide.
The screen image may blink when playing
videos on fast forward or fast reverse.
The screen image may be distorted,
depending upon the external device being
used (e.g., video tapes, laserdiscs.)
COPYING FROM AN EXTER-
NAL DEVICE TO DVD
To copy video from an external device, such as a
VCR or DVD player, perform the following steps:
Be aware that many videotapes and DVD
discs are copy-protected to prevent
duplication. Attempting to copy such media
will be unsuccessful.
1. Connect the external device in accordance
with “Connecting the TV tuner” on page 34.
2. Start Instant MyMedia by pressing the TV
button on the remote control.
3. Insert a blank DVD-RAM disc in the notebook
media player.
4. Press the TV/Video button on the remote
control and select Composite or S-Video,
depending upon which type of cable is
connected to the external device. (See
“Connecting the TV tuner” on page 34).
5. Insert the tape or disc in the external device
and start playing it.
6. Press the [REC] button on the remote control.
If it is not copy-protected, the program being
viewed will be copied to the DVD-RAM in the
notebook.
LB_Topaz 04 (23-54) 11/10/05, 8:33 AM39
To Next Page
Loading...
Need help?
General