46
The change to the region code can be
made up to 4 times including changes to
“WinDVD” and “WinDVR” on the
notebook. When changes to the region
code have been made 4 times, the code
is fixed to the last one, disabling DVDs
having other region codes from being
played. Note that there is no way to
change the fixed region code.
Region codes cannot be changed while
playing DVDs. Press [Stop/Eject] first.
1. Press the [Menu] button to display the menu.
2. Confirm the current region code. The item with
a “O” attached on the left side is the region
code that is currently set.
3. Select a new region and press the [Enter]
button. Only the DVDs having the region code
newly set can be played.
Setting the play start position
Set the position for starting the play of DVDs.
1. Press the [Menu] button to display the menu
and select Auto Resume from the list.
2. In the right column, select the setting you
would like and press the [Enter] button.
Start from the beginning: Play from the start
of the disc regardless of the position where it
was previously stopped.
Start from last position: Play from the
position where the disc was previously
stopped.
The change to the setting of auto resume
becomes effective after the notebook has
been powered off.
Changing a language used in audio and
captions
Audio and captions can be selected from multiple
languages depending on the DVD. To change a
language for audio/captions during the play, use
the [Audio] button on the remote control.
1. Press the [Menu] button to display the menu
and select Audio Language or Subtitle
Language from the list. The language for audio
can be changed if the “Audio Language” is
selected, and the language for captions can
be changed if the “Subtitle Language” is
selected.
2. Select a language you would like from the right
column and press the [Enter] button.
The change to the setting of audio languages
and subtitle languages becomes effective
after the notebook has been powered off.
Using bookmarks
Scenes that you like can be recorded in
bookmarks and DVDs can be played from the
recorded points.
• Recording Bookmarks
1. Pause at the scene to be recorded by pressing
the [Play/Pause] button.
2. Press the [Menu] button to display the menu
and select Menu from the list.
3. Select “Bookmark” in the right column and
press the [Enter] button.
4. Select “Add Bookmark” and press the [Enter]
button.
• Selecting a bookmark
1. Press the [Menu] button and select “Menu”.
2. Select “Bookmark” and press the [Enter]
button.
3. Select a bookmark you want to read and press
the [Enter] button. Pressing the [Enter] button
after selecting “Preview” enables you to view
thumbnails of the scenes bookmarked.
4. Select the scene you would like to view and
press the [Enter] button. Play is started from
the position of the bookmark.
5. Select “Delete” and press the [Enter] button
to delete the bookmark.
LB_Topaz 04 (23-54) 11/10/05, 8:33 AM46
To Next Page
Loading...
