34
NC-17: No One 17 And Under Admitted
This rating declares that the Rating Board
believes that this is a film that most parents will
consider too adult for their youngsters under 17.
No children should be allowed to view an NC-17
film. The reasons for an NC-17 rating can be
violence, sex, aberrational behavior, drug abuse,
or any other element which most parents would
consider too strong for viewing by their children.
Setting the Parental Lock for DVD/CD Mode
1. While in DVD/CD mode, press the [Menu]
button to display the menu. Select the
Parental Control tab.
2. If you have already set a password, go to
Password Change and enter the password
in Input Password. Press the [Enter] button.
3. If you have not yet set a password, select
Password change, select New Password and
press the [Enter] button.
4. Input a password with the (1)-(9) buttons and
press the [Enter] button.
5. Select “Confirm new password”, enter the
password again, and press the [Enter] button.
If the passwords entered in the two steps do
not match each other, you will receive a
message. Press the [Enter] button to erase
the message, then start again.
6. Once the password has been successfully
entered, press the [Enter] button. A password
is set, making the parental lock effective. After
this, to cancel the parental lock or change
the protection levels, this password is
required.
7. Select “Level change” and select the level
you would like. Press the [Enter] key. A green
dot will appear next to the selected level.
8. Select “Exit” and press the [Enter] button.
Instant MyMedia does not support the DVDs
that have been set to enter a password at
the time of play. When playing these DVD-s,
set the parental level of Instant MyMedia to
“Disabled.”
Changing a Password
The password necessary for changing the
parental lock level can be changed.
1. Press the [Menu] button to display the menu
and select “Parental Control”.
2. Select “Password change”. When “****” is
displayed in the column, an effective
password has already been entered.
3. If a password has not been selected, select
“Input password” and press the [Enter]
button.
4. Input password with the (1) - (9) buttons of
the remote control and press the [Enter]
button.
– The password entered here is effective
until the menu screen is closed.
– If a wrong password is entered, a
message is displayed. Press the [Enter]
button to erase the message, then
proceed again from Step 1.
5. Select the “New password” and press the
[Enter] button.
6. Input a new password with the (1) - (9)
buttons of the remote control and press the
[Enter] button.
7. Select “Confirm new password” and press
the [Enter] button.
8. Input a new password again with the (1) - (9)
buttons of the remote control and press the
[Enter] button. The password is changed.
After this, the new password is required to
change the parental lock level. If the
passwords entered in the two steps do not
match, a message is displayed. Press the
[Enter] button to erase the message, then
return to step 1.
9. Press the [Enter] button to erase the
message.
LB_Topaz 04 (23-40) 2/3/05, 2:27 PM34
To Next Page
Loading...
