Fujitsu LIFEBOOK P727 - Ports on the Port Replicator; Setting up the Port Replicator

Working with the notebook
58
Fujitsu
2
3
Ports on the port replicator
1 = Combined headphones/microphone port
2 = USB 3.0 port
3 = VGA monitor port
4 = HDMI
5 = Display Port
6 = LAN port
7 = USB 3.0 port for data connection
only (USB Type-C
TM
)
8 = ON/OFF button with power-on indicator
9 = DC input connector (DC IN)
10 = USB 3.0 port for data connection
and power supply for the notebook
(USB Type-C
TM
)
Setting up the port replicator
Select a suitable location for the port replicator before setting it up. In
doing so, please follow these instructions:
• Never place the port replicator on a soft surface (e.g. carpeting, upholstered furniture, bed).
This can block the air vents of the notebook and cause overheating and damage.
• Place the port replicator on a stable, flat and anti-slip surface. Please note that
the rubber feet may mark certain types of surfaces.
• Never place the port replicator and the mains adapter on a heat-sensitive surface.
• Do not expose the port replicator to extreme environmental conditions.
Protect the port replicator from dust, humidity and heat.
6
5
4
1
8
2
7
8
9
10