Working with the notebook
Switching on the notebook via the port replicator
► Press the ON/OFF button on the port replicator to switch on the notebook.
Switching off notebook via port replicator
► Close all applications and then shut down your operating system (please
r
efer to the manual for the operating system).
If the notebook cannot be shut down properly, press the ON/OFF button on
the port replicator for approx. four seconds. The notebook will switch off.
However, any unsaved data may be lost in the process.
Disconnecting the notebook from the port replicator
► Disconnect the supplied USB cable (USB Type-C
TM
) from the USB 3.0 port
(USB Type-C
TM
) on the notebook.