The notebook stops working
The notebook is in energy saving mode.
► End energy saving mode.
An application program has caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
s
ystem or switching the device off and back
on again).
or
► Insert a charged battery.
or
►
Connect the AC adapter to the notebook.
The printer does not print
The printer is not switched on.
► Make sure that the printer is switched
on and ready for operation (refer to the
doc
umentation supplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connection to a network does not work
The wireless component is switched off.
► Switch the wireless component on (see
"Switching the wireless components on and
of
f", Page 55
).
The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connection is
enabled by the software.
► Further information on using the wireless
component can be found in the help files.
To Next Page
Loading...
