Brief overview of the security functions
Detailed information about the security equipment of your system can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
or on our website at "http://www.fujitsu.com/us/support/"
.
Security function Type of protection
Preparation
Security Lock
Mechanical
Fit and lock the Kensington
Lock Cable (accessory).
Fingerprint sensor
(configuration dependent)
Biometric
Install the supplied fingerprint
software.
Palm scanner (configuration
dependent)
BIOS password protection
Password protection for
the BIOS Setup, operating
system and hard disk with
supervisor and user password.
The passwords consist of a
maximum of eight alphanumeric
characters.
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the operating
system and hard disk as
desired.
Boot from Removable Media Prevents unauthorized booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive, etc.).
In the BIOS Setup, go to the
Security menu and edit the Boot
from Removable Media option.
Owner Information Display service desk or owner
information during the boot
process.
In the BIOS Setup, go to the
Security menu and edit the
Owner Information option.
Smart Card reader
(configuration dependent)
PIN and SmartCard protection
for the operating system
To use the SmartCard reader
functions, install the supplied
(or other suitable) software.
Trusted Platform Module
(configuration dependent)
Identification and authentication
of the notebook
Define a supervisor password
in the BIOS Setup and enable
the TPM (Security Chip).
To Next Page
Loading...
