Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need t o select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS S etu p Utility,selectExit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To copy th e s tandard entries for all menus of the BIOS Setup U tility,
choose Load Setup De faults and Yes.
Discard Changes – Discard changes without exiting
the BIOS Setup Utility
► To discard the changes you have made, select Discard Changes an d Yes.
ThesettingsinplacewhenBIOS Setup Utility was called remain effective.
Yo u can now make additional settings in the BIOS Set up Utility.
► If yo u want to exitBI OS Setu p U tilityw ith these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save cha nges w ithout exiting
the BIOS Setup Utility
► To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the B IO S Setup U tility.
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The chang es are sa ved. Your device is shut down.
Fujitsu Technology Solutions 75
To Next Page
Loading...
