23
- Locating the Controls and Connectors
USB 2.0 Ports
The USB 2.0 ports (one on the left side, two on the rear) allow you to connect Universal Serial Bus
devices. USB 2.0 transfers data at up to 480 Mbps and is backward-compatible with USB 1.1 devices,
which transfer data at up to 12 Mbps. See “Universal Serial Bus Ports” on page 92.
PC Card Slot
The PC Card Slot allows you to install a Type I or Type II PC Card. See “PC Cards” on page 83.
PC Card Eject Button
The PC Card eject button is used for removing a PC Card from the slot.
Pen Garage
The pen garage is used to store the pen when not in use.The pen is used to interface with the display.
Pen Tether Attachment Point
The pen tether attachment point is designed to securely hold a pen tether to prevent loss of the pen. See
“Installing a Pen Tether” on page 50 for additional information.
Memory Stick/SD Card Slot
The Memory Stick/SD card slot allows you to install a Memory Stick or a Secure Digital (SD) card for
data storage. This architecture allows you to transfer data from a variety of different digital devices. See
“Installing Memory Stick/SD Cards” on page 82.
Microphone Jack
The microphone jack allows you to connect an external mono microphone. See “Microphone Jack” on
page 93.
DC Power Jack
The DC power jack allows you to plug in the AC adapter to power your LifeBook Tablet PC and charge
the internal Lithium ion battery.
To Next Page
Loading...
Need help?
General