First-time setup of your device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 13.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and sup p lied software are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the AC adapter, see "
Connecting the AC adapter", Page 18. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on th e screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate y our device using the battery.
When used on the move, the built-in battery provides the device with th e necessary power. You
can increase the operating time by using the available energy saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please r efer to the operating ma nual for your device.
Unpacking and
checking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all th e individual parts.
PackagingTransport
► Check your
device for any visible damage w hich may have occurred during transportation.
You m ay ne
ed to reuse the packaging in the future, for example if
you need t
o ship your device.
Fujitsu 17
To Next Page
Loading...
