First-time setup of your device
Choose a location
ChoosealocationSetupACadapter
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device or the AC adapte r on a heat-sen sitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device he ats up during normal operation. Prolonged contact
with the skin can become unpleasan t or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Plea se note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97 inches away from the device
and its AC adapter to ensure ade quate ventilation.
• Never cover the ventilation openings of the device.
• Do not expose the device to extreme environmental conditions.
Protect the device against dust, humidity and heat.
Connecting the AC adapter
MakingreadytouseACadapter
Observe the safety notes in the en closed "Safety/Regulations" manual.
The supplied A C cable conforms to the requireme nts of the country in which
you purchased your device. Ma ke sure that the AC cable is approved for
use in the coun try in which you intend to u se it.
3
1
2
► Connect the AC cable (1) to the AC adapte r.
► Plug the AC cable (2) into a power outlet.
► Connect the AC adapter cable (3) t o the
DC jack socket (DC IN) of the device.
18 Fujitsu
To Next Page
Loading...
