Connecting external devices
Connecting an external monitor
An analog monitor is co nnected to the analog external monitor port (VGA), a digital
monitor to the Display Po rt or to the DVI-D monitor port (see overview below).
Display ou tput is limited to a maximum of two monitors at any one time (see "
Key
comb inations", Page 25, section "Toggling the display output").
MonitorV GAsocketMonitorportMonitorport
Digital Display Port (on device and on opt ional
port replicator)
Analog external m onitor port (VGA) (on device
and on optional port replicator)
Digital DVI-D monitor port (only on optional port
replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the desired monitor port.
► First switch on the external monitor and then the noteboo k.
You can also switch back and forth between the external monitor and the LCD
screen of the note book, see chapter "
Key combinations", Pa ge 25.
You c an display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu 51
To Next Page
Loading...
