Working with the no tebook
Connecting the AC adapter to the port replicator
3
1
2
► Connect the AC cable to the AC adapter (1).
► Plug the AC c able into the power outlet (2).
► Connect the AC adapter cable to the DC
jack (DC I N) of the port replicator (3).
When t he notebook is connected to a port replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profi le, for example, the monitor
which wa s last used for output is saved as a setting. This profile will be loaded as
soon as the notebook is connected to a port replicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/OF F button on the port
replicator to switch the notebook on.
The power-on indicator of the port
replicator lights up.
Switching off notebo ok via port replicator
► C lose all app lica tion s and then shut down your operating system (please
refer to t he manu al for the operating system).
If the notebook cannot be shut down properly, press the O N/OFF button on
the port replicator for approx. four seconds. The notebook will switch off.
However, any unsaved data may be lost in the process.
42 Fujitsu
To Next Page
Loading...
