First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure m ust not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do s o!
To make it easier to use yo
ur device for the first time, the operating system is pre-installed on the drive.
1
2
► Press the ON/OFF button (1) for about one second to switch the device on.
The power-on indicator (2) lights up whenever the system is switched on.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, upd ates, manuals etc.
on the device or on the Internet under "
https://support.ts.fujits u.com".
You can find information and help on the Windows operating system functions
on the Internet at "
http://windows .microsoft.com" .
18 Fujitsu
To Next Page
Loading...
