C141-E167 4 - 1
CHAPTER 4 Parameter Data Formats
4.1 Mode Parameters
4.2 Log Parameters
This chapter describes detailed parameter data formats provided by the IDD and how to use them.
4.1 Mode Parameters
This clause describes the block descriptors and the pages used with MODE SELECT and MODE SENSE
commands that are applicable to all SCSI devices. Pages specific to each device type are described in the
command standard that applies to that device type.
4.1.1 Read/Write error recovery parameters (page code = 1)
Figure 4.1 shows the format of the page descriptor of this MODE SELECT parameter.
To Next Page
Loading...
