Glossary
C141-E167 GL-3
status, this is information generated by the target for reporting detailed
information on that status.
Sense Key
This is a 4-bit code displayed in the sense data. It contains information for
classifying the type of error that was detected.
Status
This is 1 byte of information reported to the initiator by the target device when
execution of each command is completed, which displays the command's
completion state.
Target (TARG)
This is the SCSI device that executes the input/output operations initiated by the
initiator (INIT). In this manual, target is abbreviated "TARG."
To Next Page
Loading...
