Fujitsu MAP3147 - Accounting Date (Page 0 E, Code 0002); Date of Manufacture (Page 0 E, Code 0001)

4.2 Log Parameters
C141-E167 4 - 53
4.2.8.1 Date of manufacture (Page 0E, Code 0001)
Bit
Byte
76543210
4
5
(MSB)
X'0001' (Parameter code)
(Date of Manufacture) (LSB)
DU DS TSD ETC TMC LBIN LP6
01000001
7 X'06' (Parameter Length)
8(MSB)
9
10
Year of manufacture (4 ASCII characters)
11 (LSB)
12
13
(MSB)
Week of manufacture (2 ASCII characters)
(LSB)
The year and week in the year that the device was manufactured shall be set in the parameter field
defined by parameter code 0001h. The date of manufacture shall not be savable by the application
client using the LOG SELECT command. The date is expressed in numeric ASCII characters (30h-
39h) in the form YYYYWW, as shown above.
4.2.8.2 Accounting date (Page 0E, Code 0002)
Bit
Byte
76543210
4
5
(MSB)
X'0002' (Parameter code)
(Accounting Date) (LSB)
DU DS TSD ETC TMC LBIN LP6
00000001
7 X'06' (Parameter Length)
8(MSB)
9
10
Accounting date Year (4 ASCII characters)
11 (LSB)
12
13
(MSB)
Accounting date week (2 ASCII characters)
(LSB)