Fujitsu MBC2073RC User Manual

1.3 System Configuration
(1) Port addressing
Every device connected with the SAS protocol has a unique address (SAS address). SAS addresses
are in the Name Address Authority (NAA) IEEE Registered format defined by SCSI Primary
Command-2 (SPC-2).
An SAS address consists of 8 bytes as a unique value set for each device.
The initiator can implement an I/O operation on an HDD by using the corresponding SAS address
stored by the HDDs.
C141-E266 19

Fujitsu MBC2073RC Specifications

General

Brand	Fujitsu
Model	MBC2073RC
Category	Storage
Language	English