Fujitsu PR-LN4 - Page 22

PR-LN4 Software Guide
22 / 34
3. Enter the IP address configured in the PR-LN4 in [Hostname
or IP address].
If you are using the standard value for the port name, [IP_] is
not added.
Set [Device type] to [AutoDetect], and clear the [Query the
printer and automatically select the driver to use] check box.
Click [Next].
4. Select the [Custom] option and click [Settings].
5. Select the [LPR] option.
Enter [lp] in the Queue Name, and select the [LPR Byte
Counting Enabled] check box.
Click [OK].
*1) Click [OK] to return to the screen from Step 4, and then
click [Next].
6. Select the driver for the printer you are using.
Click [Next].
1
2
1
2
4
3
1
3
2