PR-LN4 Software Guide
7. Select from [Keep existing driver] and [Replace existing
driver].
Click [Next].
*1) If you have installed the latest driver separately, select
[Replace existing driver].
8. Registers the printer name.
Click [Next].
*1) For Windows Vista
It is also possible to set to the "Default Printer".
If you are using the OS of Windows 7 and later, can be set in
the next screen.
*2) After click Next, if the printer shared screen is displayed, please
share settings as needed. Then, please click on the [Next].
If you will also be using this printer from other computers in the
same network, select [Share].
9. If necessary, please print the test page and to set the default
printer. Then please click on the [Finish].
To Next Page
Loading...
