EasyManuals Logo

Fujitsu PRIMERGY RX1330 M3 User Manual

Fujitsu PRIMERGY RX1330 M3
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38 Operating Manual RX1330 M3
Important information
Do not pull on, press hard, or otherwise handle the CD/DVD/BD tray
roughly.
Do not disassemble the optical disk drive.
Before use, clean the optical disk tray using a soft, dry cloth.
As a precaution, remove disks from the optical disk drive when the
drive is not to be used for a long time. Keep the optical disk tray
closed to prevent foreign matter, such as dust, from entering the
optical disk drive.
Hold CDs/DVDs/BDs by their edges to avoid contact with the disk
surface.
Do not contaminate the CD/DVD/BD surface with fingerprints, oil,
dust, etc. If dirty, clean with a soft, dry cloth, wiping from the center to
the edge. Do not use benzene, thinners, water, record sprays,
antistatic agents, or silicone-impregnated cloth.
Be careful not to damage the CD/DVD/BD surface.
Keep the CDs/DVDs/BDs away from heat sources.
Do not bend or place heavy objects on CDs/DVDs/BDs.
Do not write with ballpoint pen or pencil on the label (printed) side.
Do not attach stickers or similar to the label side. Doing so may cause
rotational eccentricity and abnormal vibrations.
When a CD/DVD/BD is moved from a cold place to a warm place,
moisture condensation on the CD/DVD/BD surface can cause data
read errors. In this case, wipe the CD/DVD/BD with a soft, dry cloth
then let it air dry. Do not dry the CD/DVD/BD using devices such as a
hair dryer.
To avoid dust, damage, and deformation, keep the CD/DVD/BD in its
case whenever it is not in use.
Do not store CDs/DVDs/BDs at high temperatures. Areas exposed to
prolonged direct sunlight or near heating appliances are to be
avoided.

Table of Contents

Other manuals for Fujitsu PRIMERGY RX1330 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX1330 M3 and is the answer not in the manual?

Fujitsu PRIMERGY RX1330 M3 Specifications

General IconGeneral
Processor ARK ID97479
CPU configuration (max)1
Intel Secure Key Technology version1.00
Intel® Quick Sync Video TechnologyNo
Intel® Hyper Threading Technology (Intel® HT Technology)Yes
HDD size2.5/3.5 \
HDD interfaceSerial ATA, Serial Attached SCSI (SAS)
Optical drive type-
Supported HDD sizes2.5, 3.5 \
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Supported storage drive interfacesSAS, Serial ATA
Bus typeDMI3
SteppingB0
Scalability1S
Processor codeSR326
Processor cache8 MB
Processor cores4
Processor modelE3-1270V6
System bus rate8 GT/s
Processor socketLGA 1151 (Socket H4)
Processor threads8
Processor codenameKaby Lake
Motherboard chipsetIntel® C236
Processor frequency3.8 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor boost frequency4.2 GHz
Processor operating modes64-bit
PCI Express configurations1x16, 1x8+2x4, 2x8
Supported instruction setsAVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)72 W
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM, DDR4-SDRAM
Memory channels supported by processorDual
Memory clock speeds supported by processor1866, 2400 MHz
Memory bandwidth supported by processor (max)37.5 GB/s
Maximum internal memory supported by processor64 GB
Compatible operating systemsMicrosoft Hyper-V Server 2012 R2 Microsoft Hyper-V Server 2016 Microsoft Windows Server 2012 R2 Datacenter Microsoft Windows Server 2016 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2016 Standard Microsoft Windows Server 2012 R2 Essentials Microsoft Windows Server 2016 Essentials Microsoft Windows Server 2012 R2 Foundation Microsoft Windows Storage Server 2012 R2 Standard Microsoft Windows Storage Server 2016 Standard Microsoft Hyper-V Server 2012 Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 Foundation Microsoft Windows Storage Server 2012 Standard VMware vSphere 6.0 SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7
Internal memory32 GB
Memory clock speed2400 MHz
Internal memory typeDDR4-SDRAM
Memory layout (slots x size)2 x 16 GB
On-board graphics card modelNot available
Power supply450 W
Number of redundant power supplies supported2
LAN controllerIntel i210
Cabling technology10/100/1000Base-T(X)
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)10 - 85 %
CertificationCE, RoHS, WEEE, GS, CE, CSAc/us, ULc/us, FCC Class A, VCCI:V3 Class A + JIS 61000-3-2, GOST, KC, CCC, C-TIck, BSMI
PCI Express slots version3.0
Chassis typeRack (1U)
Weight and Dimensions IconWeight and Dimensions
Depth572 mm
Width435.4 mm
Height42.8 mm
Weight13000 g

Related product manuals