RX1330 M3 Operating Manual 63
Starting up and operation
Indicators on the hot-plug HDD/SSD module
Figure 12: Indicators on the hot-plug HDD/SSD module
Pos. Label Indicator Status Description
1
Access
indicator
off
The HDD/SSD is inactive.
green on The HDD/SSD is being accessed.
2
Error
indicator
off No HDD/SSD error detected.
orange on
An HDD/SSD error has been
detected.
Possible causes:
– The drive is defective and needs
replacing.
– A RAID rebuild process has
failed.
– The HDD/SSD module has not
been inserted correctly.
orange
flashing
slowly
RAID rebuild is in progress. Data is
being restored after replacing a
drive that has been combined into a
RAID array.
To Next Page
Loading...
