Fujitsu PRIMERGY RX1330 M4 User Manual

20 Operating Manual RX1330 M4
Product description
System board
The features of the system board are described in the "FUJITSU Server
PRIMERGY RX1330 M4 Upgrade and Maintenance Manual". The setup
possibilities are described in the "D3675 BIOS Setup Utility for FUJITSU Server
PRIMERGY RX1330 M4 Reference Manual".
Trusted Platform Module (TPM)
A TPM for safer storage of keys can be implemented as an option. This module
enables programs from third party manufacturers to store key information (e.g.
drive encryption using Windows Bitlocker Drive Encryption).
The TPM is activated via the BIOS (for more information, see the “D3675 BIOS
Setup Utility for FUJITSU Server PRIMERGY RX1330 M4 Reference Manual").
V CAUTION!
– When using the TPM, note the program descriptions provided by the
third party manufacturers.
– You must also create a backup of the TPM content. To do this, follow
the third party manufacturer instructions. Without this backup, if the
TPM or the system board is faulty, you will not be able to access your
data.
– If a failure occurs, please inform your service about the TPM
activation before it takes any action, and be prepared to provide them
with your backup copies of the TPM content.

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller